Connecting Cables to the SP7208
View content for :
Platform:

Connecting Cables to the SP7208

To connect the cables to the SP7208:
  1. Insert the host cable into the SP7208 host port.
  2. If connecting an auxiliary scanner, insert the auxiliary scanner cable into the SP72 aux port.
  3. For an optional EAS connection, see
  4. If connecting an optional color camera, insert the camera cable into the SP7208 color camera port.
  5. If connecting an auxiliary scanner or color camera, connect the 12V power supply to the power port.
If connecting the 12V power supply, you must connect this last to ensure proper scanner operation.
The USB-C connector on this device is not electrically symmetrical. The cable included with the device is designed to fit in one orientation only. Using a non-provided USB-C cable may result in inserting the cable in the wrong electrical orientation rendering the color camera inoperable.
For specific host connection instructions, see the applicable host interface chapter. The connectors illustrated are examples only, and actual cables can vary, but the steps to connect the scanner are the same.
1
Host port
2
Aux port
3
EAS port
4
Color camera port
5
Power port