Mounting the SP72-H Resting on the Counter Top
View content for :
Platform:

Mounting the SP72-H Resting on the Counter Top

To mount the scanner resting on the counter using the Bucket Mount:
  1. Cut a hole in the countertop at the desired scanner location, measuring 6.26 in. (159 mm) square.
    Image shows the scanner and bucket with dimension labels
  2. Place the Bucket Mount into the hole.
  3. Place the scanner on the counter near the bucket.
  4. Route the cables from beneath the hole and attach to the scanner.
  5. Use the lift features to lower the scanner into the bucket.
  6. Install the platter.
The arrows on the bucket and the platter must align (face in the same direction). Arrows indicate the scan direction.