Mounting the Scanner Using Double-sided Tape
View content for :
Platform:

Mounting the Scanner Using Double-sided Tape

(Preferred method) To mount the scanner to the tabletop using the double-sided tape provided:
  1. See Installing Cables to connect all interface and power cables.
  2. Replace the back cover and verify the cables are routed properly.
  3. Determine the location for the scanner.
  4. Peel off the paper on one side of the double-sided tape strip and press it into the rectangular area on the bottom of the mount.
  5. Peel off the paper on the remaining side of the double-sided tape strip.
  6. Position the mount and press down onto the table surface.
  7. Align the scanner mounting slots with the plastic tabs on the mount.
  8. Slide the scanner back until it clicks into place, with the plastic tabs in the scanner mounting slots.