Rescan Beep
View content for :
Platform:

Rescan Beep

Parameter #
2382
(SSI # F8 09 4E)
This feature allows the user to acoustically recognize if/when an item is scanned multiple times, either intentionally or unintentionally.
The standard decode tone is heard after the 1st decode and any odd numbered decode after that (3rd, 5th, 7th, etc.).  A higher frequency “rescan beep” tone is heard after the 2nd decode and any even numbered decode after that (2nd, 4th, 6th, etc.).  If the standard decode tone is changed to something other than the default, the odd numbered decodes would use this newly defined tone while the even numbered decodes would always use the rescan beep tone.
When this feature is disabled, the standard decode tone will be used for all decodes.
To enable this feature, scan the Enable barcode followed by three barcodes from Numeric Barcodes to set the Rescan Beep Timeout.  The Rescan Beep Timeout determines how long the scanner will wait between decodes before it considers the next decode a 1st scan attempt. The Rescan Beep Timeout range is 1 (001) to 255 (255) seconds.  We recommend setting this parameter initially to 5 (005) seconds and adjusting as needed.
Rescan Beep Enable
Rescan Beep Enable