User Preferences/Miscellaneous Options

MP72 Scanner Scale Barcode Programming Guide
About This Guide
- Notational Conventions
- Icon Conventions
- Service Information
123Scan and Software Tools
- 123Scan
- Advanced Data Formatting
- Multicode Data Formatting
  - Multicode Data Formatting Use
  - MDF for Best Practices
- Preferred Symbol
USB Interface
- USB Parameter Defaults
- USB Device Type
- USB Device Type (continued)
- USB CDC Host Variant
- USB Keystroke Delay
- USB Caps Lock Override
- Scan Disable Mode
- USB Barcodes with Unknown Characters
- USB Convert Unknown to Code 39
- USB Fast HID
- USB Polling Interval
- USB Polling Interval (continued)
- USB Polling Interval (continued)
- Keypad Emulation
- USB Quick Keypad Emulation
- Keypad Emulation with Leading Zero
- USB Keyboard FN1 Substitution
- USB Function Key Mapping
- USB Simulated Caps Lock
- USB Convert Case
- USB Static CDC
- TGCS (IBM) USB Direct I/O Beep
- USB IBM Long Direct I/O
- TGCS (IBM) USB Beep Directive
- TGCS (IBM) USB Barcode Configuration Directive
- TGCS (IBM) USB Specification Version
- IBM Flash Update
- IBM Scanner Generic Management Information
- IBM Scanner Vendor Specific Management Information
- IBM Scale Generic Management Information
- IBM USB Scale Default Response Status
- USB ASCII Character Sets
RS-232 Interface
- RS-232 Parameter Defaults
- RS-232 Host-Specific Parameter Settings
- RS-232 ASCII Character Sets
IBM 468X / 469X Interface
- IBM Parameter Defaults
- IBM Host Parameters
Scale Configuration
- Scale Parameter Defaults
- Legal Scale Units
- Legal Scale Dampening Filter Setting
- Scale Enable
- Scale Reset
- Scale Display Configuration
- Scale Enforce Zero Return
- Scale Beep After Weight Request
- Ignore Scale Pole Directives
- Maximum Initial Zero Setting Range
- Maximum Scale Zeroing Weight Limit
- Weighing Behind Zero Mode
- Scale 5 Digit Directive
User Preferences and Miscellaneous Options
- User Preferences/Miscellaneous Options
- User Preferences
- Miscellaneous Scanner Parameters
Image Capture Preferences
- Image Capture Preferences Parameter Defaults
- Image Capture Preferences Modes and Parameters
Electronic Article Surveillance (EAS)
- EAS Parameter Defaults
- EAS Parameters
Auxiliary Scanner Barcodes
- Auxiliary Scanner Defaults
- Auxiliary Scanner Decode with Unknown Type
- Host Type
  - Zebra Scanner Auto Switch Mode
- Baud Rate
- Baud Rate (continued)
- Data Bits
- Stop Bits
- Parity
- Host RTS State
- USB Auxiliary Ports
- Aux 1 Baud Rate
- Aux 1 Data Bits
- Aux 1 Stop Bits
- Aux 1 Parity
- Aux 2 Baud Rate
- Aux 2 Data Bits
- Aux 2 Stop Bits
- Aux 2 Parity
- Beep on Aux Decode
SSI Interface
- Communication
  - SSI Commands
- SSI Transactions
  - General Data Transactions
    - ACK/NAK Handshaking
  - Decoded Data Transmission
- Communication Summary
- Encapsulation of RSM Commands/Responses over SSI
- Setting SSI Parameters
  - SSI Scanning Sequence Examples
  - SSI Errors While Scanning
- Simple Serial Interface Parameter Defaults
- SSI Host Parameters
- Event Reporting
SNAPI Interface
Symbologies
- Symbology Parameter Defaults
- Enable/Disable All Code Types
- UPC/EAN/JAN
- Code 128
- Code 39
- Code 93
- Interleaved 2 of 5 (I 2 of 5)
- Discrete 2 of 5 (D 2 of 5)
  - Set Lengths for Discrete 2 of 5 (D 2 of 5)
- Codabar (NW - 7)
- MSI
- Chinese 2 of 5
- Inverse 1D
- GS1 DataBar
- Symbology-Specific Security Features
- Random Weight Check Digits
- 2D Symbologies
- Macro PDF Features
Driver's License Set Up
- Driver’s License Parsing
- Parsing Driver’s License Data Fields (Embedded Driver's License Parsing)
- DL Parsing User Preferences
- Send Keystroke (Control Characters and Keyboard Characters)
  - Control Characters
  - Keyboard Characters
- Parsing Rule Example
Numeric Barcodes
- Numeric Barcodes (continued)
- Numeric Barcodes (continued)
- Cancel
Alphanumeric Barcodes
- Cancel
- Alphanumeric Barcodes
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
- Alphanumeric Barcodes (continued)
ASCII Character Sets
Programming Reference
- Symbol Code Identifiers
- AIM Code Identifiers
Communication Protocol Functionality
- Functionality Supported via Communication (Cable) Interface
Country Codes
- Country Code Barcodes
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
- Country Code Barcodes (continued)
Country Code Pages
- Country Code Page Defaults
- Country Code Page Barcodes
CJK Decode Control
- CJK Control Parameters
- Unicode/CJK Decode Setup with Windows Host
Non-Parameter Attributes
- Model Number
- Serial Number
- Date of Manufacture
- Date of First Programming
- Configuration Filename
- Beeper/LED
- Parameter Defaults
- Beep on Next Bootup
- Reboot
- Host Trigger Session
- Firmware Version
- Scankit Version
Sample Barcodes
- Sample Code 39
- Sample Code 93
- Sample UPC/EAN
- Sample Code 128
- Sample Interleaved 2 of 5
- Sample Chinese 2 of 5
- Sample GS1 DataBar
- Sample PDF417
- Sample Data Matrix
- Sample QR Code
- Sample Aztec
  - Sample Grid Matrix

Parameter	Parameter Number¹	SSI Number²	Default
User Preferences
Set Default Parameter			N/A
Parameter Barcode Scanning	236	ECh	Enable
Beep After Good Decode	56	38h	Enable
Beeper Volume	140	8Ch	Highest
Beeper Tone	145	91h	Medium
Beeper Duration	628	F1h 74h	Medium
Tone/Volume Button	1287	F8h 05h 07h	Enable Tone, Enable Volume
Suppress Power Up Beeps	721	F1h D1h	Do Not Suppress
Decode Session Timeout	136	88h	9.9 Seconds
Hands-Free Decode Session Timeout	400	F0h 90h	6.6 Seconds
Timeout Between Decodes, Same Symbol	137	89h	0.5 Seconds
Same Symbol Timeout Mode	724	F8h 02h D4h	Unconditional
Enhanced Same Symbol Timeout Mode	1844	F8h 07h 34h	Disable Enhanced Same Symbol Timeout Mode
Extended Same Symbol Timeout – GS1 Databar	2399		20 (2 Seconds)
Same Symbol Report Timeout	1284	F8h 05h 04h	Disable
Timeout Between Decodes, Different Symbols	144	90h	0.1 Seconds
Trigger on Scan Disable / Enable Sequence	2398		Disable
Object Detect Field of View	2431		Platter (Horizontal) and Tower (Vertical) Views
Mobile Phone/Display Mode	716	F1h CCh	Disable
PDF Prioritization	719	F4h F1h CFh	Disable
PDF Prioritization Timeout	720	F1h D0h	200 ms
USB Serial Number Format	1832	F8h 07h 28h	Serial Number
RS-232 Device Port Configuration	1246	F8h 04h DEh	0
RS-232 Auxiliary Port Scale Protocol	1247	F8h 04h DFh	SASI
Third Party Scale	1294	F8 05 0E	Disable
Third Party Scale LED Pin	1295	F8 05 0F	Active High
Third Party Scale Zero Pin	1296	F8 05 10	Active High
Product ID (PID) Type	1281	F8h 05h 01h	IBM Unique
Product ID (PID) Value	1725	F8h 06h BDh	0
ECLevel	1710	F8h 06h AEh	0
Miscellaneous Options
Enter Key	N/A	N/A	N/A
Tab Key	N/A	N/A	N/A
Transmit Code ID Character	45	2Dh	None
Prefix Value	99, 105	63h, 69h	7013 <CR><LF>
Suffix 1 Value	98, 104	62h, 68h	7013 <CR><LF>
Suffix 2 Value	100, 106	64h, 6Ah	7013 <CR><LF>
Scan Data Transmission Format	235	EBh	Data As Is
FN1 Substitution Values	103, 109	67h, 6Dh	7013 <CR><LF>
Copy Statistics to a Staging Flash Drive	1137	F8h 04h 71h	Enable Copy Statistics to a Staging Flash Drive
Sync Bootup Beep Volume	2412		Disable
Not on File Number of Beeps	2411		5 Beeps
User Data	1825	F8h 07h 11h	N/A
Report Software Version	N/A	N/A	N/A