Installing the Hand Strap on the Side of the Device

Align the upper and lower hand strap mounting holes with the screw holes on the device.

Using a T6 Torx screwdriver, secure the upper and lower hand strap to the device using the two M2.5x11 screws (2), and two washers (1).

Torque the screws to 20 N-cm (1.77 lb. in).

Feed the lower half of the hand strap through the upper half.

Position the hand strap for the right fit.

Align the stud with a hole in the lower half.

Press the lower hand strap down until the stud comes through the hole.