1. ET51/56 Enterprise Tablet Product Reference Guide
  2. Accessories
  3. Expansion Back
  4. Installing the Expansion Back
  • ET51/56 Enterprise Tablet Product Reference Guide for Android™
Installing the Expansion Back

Installing the Expansion Back

To install an Expansion Back:
Remove power before installing the Expansion Back.
  1. Power off the device.
  2. Remove battery cover and store in safe place.
    remove battery cover
  3. On 8.4 in. version only, remove rubber gasket.
    remove rubber gasket
  4. Align expansion back with device. Ensure that the power pack slot cover (1) is aligned with the bottom of the device and the interface connector (2) on expansion back aligns with interface connector on device.
    Align Expansion Back with 8 in. Device
    align expansion back with device
    Align Expansion Back with 10 in. Device
    Align Expansion Back with 10 in. Device
  5. Using a T6 Torx screwdriver, secure expansion back to device using four screws (1). Torque to 14 n-cm.
    secure expansion back to device