Scanning with the Internal Imager
Scanning with the Internal Imager

Scanning with the Internal Imager

Use the internal imager to capture barcode data.
  1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
  2. Point the exit window of the device at a barcode.
  3. Press and hold the Scan button or trigger.
    The red laser aiming pattern turns on to assist in aiming.
  4. Ensure the barcode is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
    Aiming Pattern
    When the device is in Pick List Mode, the device does not decode the barcode until the center of the crosshair touches the barcode.
    Aiming Pattern - Picklist
    The Data Capture LED light green and a beep sounds, by default, to indicate the barcode was decoded successfully.
  5. Release the Scan button.
    Imager decoding usually occurs instantaneously. The device repeats the steps required to take a digital picture (image) of a poor or difficult barcode as long as the scan button remains pressed.
    The barcode content data displays in the text field.