Using the Manual Print Width Adjustment
Using the Manual Print Width Adjustment

Using the Manual Print Width Adjustment

Use this procedure to set the maximum print width without programming.
Do not set the print width wider than the media width. The printhead and platen (drive) roller can be damaged or degrade component life.
  1. Press the
    PAUSE
    button while the
    Pause indicator
    is illuminated yellow.
  2. The printer prints a 16 mm (0.63 in.) box and pauses momentarily.
  3. The printer then prints a slightly larger box and pauses again.
    To return to the maximum print width setting, allow the printer to proceed without pressing the
    FEED
    button.
  4. When you see the printer print a box that matches the width of your media, press the
    FEED
    button to set the print width and return to the READY state.