SmartCal Media Calibration
SmartCal Media Calibration

SmartCal Media Calibration

SmartCal is used to quickly calibrate the printer to the media currently loaded.
During SmartCal, the printer automatically determines the media sensing type (gap, black line, or notch), and then measures the length of the media.
  1. Make sure the media is properly loaded, the printer cover is closed, and printer power is ON.
  2. Press and hold the
    PAUSE
    +
    CANCEL
    buttons for two seconds.
  3. The printer will feed and measure several labels. When done, the printer will return to
    READY
    status.
If the printer should fail to recognize and correctly calibrate to the media, refer to the Manual Media Calibration Mode procedure later in this section.