• SP72 Product Reference Guide
Downloading a Custom Tone via 123 Scan
Downloading a Custom Tone via 123 Scan

Downloading a Custom Tone via 123 Scan

  1. Download and install Zebra's 123Scan Scanner Configuration Utility from the support web site: zebra.com/123Scan.
  2. Open 123Scan.
    123 Scan Utility
    Home page for 123 scan
  3. Select
    Clone/modify my connected scanner settings
    .
    USB Parameter Change Window
    Pop-up window for USB Parameter Change
  4. Select
    CLOSE
     in the dialog window.
    General Parameters Sections
    123 Scan General Parameter Section Page
  5. Select
    General > Beeper
    .
  6. Click
    Select Tone from PC
     button to navigate to and select the custom tone.
    Enable Custom Scan Tone Window
    Pop-up window to Enable Custom Scan Tone
  7. Select
    YES
     on the dialog window to set the Scan Tone parameter to the
    User Programmable/Tone 6
     option.
    The
    Scan Tone
     field indicates
    Tone 6 - User Programmable
    , and the
    Set Custom Scan Tone
    field now reflects the selected WAV file name.
    Updated General Parameters Section
    Updated Screen for the General Parameters section of 123 Scan
  8. Select
    Load to Scanner
     at the top of the window.
    Load Configuration Window
    The pop-up window for load configuration in 123 Scan
  9. Select a scanner in the list or select
    LOAD TO ALL SCANNERS
     to send the configuration file to all scanners listed.
    Load Configuration Complete Window
    Pop-up window for completed load configuration in 123 scan
  10. Select
    CLOSE
     when the upload completes.
  11. Verify that the custom tone was successfully downloaded to the scanner by scanning a barcode.