1. FS80 Fixed Industrial Scanner Product Reference Guide
  2. Electrical Installation
  3. Auxiliary Output Signal Connections
  • FS80 Fixed Industrial Scanner Product Reference Guide
Auxiliary Output Signal Connections

Auxiliary Output Signal Connections

Integrate external devices with the scanner’s auxiliary output signals, which interface with PLC input modules and inductive loads such as relays. These NPN-type sinking outputs need an external power source and typically operate in a sinking configuration with shared common pins (AUX_OUT_COMMON). When on, the circuit closes, allowing current flow; when off, it opens, stopping the current.
Add 3 KOhms pull-up or pull-down resistors for predictable voltage levels. The signals handle up to 24 V and 50 mA, with resettable fuses for protection. The outputs are optically isolated from power and control signals but not from each other. Detailed connection procedures are available for third-party devices.