1. FS80 Fixed Industrial Scanner Product Reference Guide
  2. Getting Started
  3. Unpacking the Device
  • FS80 Fixed Industrial Scanner Product Reference Guide
Unpacking the Device

Unpacking the Device

Unpack the FS80 Fixed Industrial Scanner and ensure all required components are in the box before attempting to set it up.
  1. Carefully remove all protective material from the scanner and save the container for later storage and shipping.
  2. Verify that the following are included:
    • FS80 Fixed Industrial Scanner
    • IP Lens Cover
    • Regulatory Guide
    • VGA/USB Connector Caps
      Keep the VGA/USB cap in place when the connector is not in use to maintain IP67 sealing and protect the scanner from dust or electrostatic discharge.
  3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer Support Center immediately.
  4. Before using the scanner for the first time, remove the protective shipping film that covers the scanner.
The scanner does not come with cables, power supplies, or manual lenses. To purchase these items, contact a Zebra sales representative.