Updating the Device Firmware

Updating the Device Firmware

Update the firmware on a connected scanner by viewing Device Settings in Zebra Aurora Focus.
  1. Select a device to view its settings.
  2. Click the ellipses in the right corner of the
    View Devices
    and select
    Firmware Update
    from the drop-down.
    FS80 Device Details
  3. Select a
    FTP/FTPS Server
    or
    File Based
    Firmware Update method
  4. Click
    Update Firmware
    .
The FS80 implements a Full or Incremental firmware update based on the current operating system installed on the scanner. The primary difference is the update process's duration and the firmware file's size. A Full Update firmware file is typically 3GB and takes approximately 30 minutes. An Incremental Update firmware file is typically 107MB, requires approximately 3 minutes, and only updates the application version. Refer to the release notes for each firmware file to understand the prerequisites for an incremental upgrade.