1. FS80 Fixed Industrial Scanner Product Reference Guide
  2. Hardware Installation
  3. Connecting the Device
  • FS80 Fixed Industrial Scanner Product Reference Guide
Connecting the Device

Connecting the Device

The scanner supports digital IO/power and Ethernet interfaces.
FS80 Connectors
Connector
Description
Digital I/O and power connector
Receives power from an external power source. The connector can also receive trigger input and send/receive digital auxiliary I/O signals to/from third-party I/O devices.
VGA/USB
Not Supported
Keep the VGA/USB cap in place when the connector is not in use to maintain IP67 sealing and protect the scanner from dust or electrostatic discharge.
Ethernet connector
Provides connectivity between the scanner and computer on the network.
  1. Connect an external power supply and third-party I/O devices to your digital I/O and power connector.
  2. Connect your network or your computer (peer-to-peer) to the scanner's Ethernet connector using a network cable with an M12 8-pin X-coded connector on one end.
  3. Connect the RJ45 connector of the cable to the network connector of your network/computer.
After connecting to the network, configure the scanner to communicate with your network or computer.
Cap the Ethernet connector to maintain IP67 conformity if the network connection is not in use.