LED Indicators

LED Indicators

At least one of the four LEDs on the back of the scanner illuminates while powered on and in use.

Power LED and User LED - these two LEDs change as the scanner boots up.

Status LED - displays the state of general device activity.

100/1G Ethernet LED - displays the connection status.

The Power and User LEDs indicate details on the power, temperature, and operating system status.

Power and User LEDs
LED Color		Description
Power	User	Description
Off	Off	The device has no power.
Orange	Orange/Red Blink	A thermal trip is detected.
Orange	Off	BIOS execution is in progress.
Green	Orange/Off Blink	Overheating detected. Temperature is above the throttle temperature limit.
Green	Off	Operating System is loading.
Green	Orange	The operating system startup is in progress.
Green	Green	The scanner is ready.

The Status LED indicates details on the image sensor and image acquisition.

Status LED
LED Color	Description
Off	There is no power, or there is an internal error.
Red/Orange	The image sensor is initializing.
Red/Orange Blink	The image sensor is not detected.
Orange	The device is in an idle state. Zebra Aurora Focus could be waiting for a trigger.
Green	Image acquisition is in progress.

The Ethernet LED indicates details on the scanner's connection to the network.

Ethernet LED
LED Color	Description
Off	There is either no activity or a low-speed (10 Mbits) connection between the scanner and the network.
Solid Yellow	There is a link on the 100 Mbits/sec connection.
Blinking Yellow	The 100 Mbits/sec connection has activity.
Solid Green	There is a link on the 1 Gbit/sec connection.
Blinking Green	The 1 Gbit/sec connection has activity.