Issue: Label Job Sent, Data Transfers, But No Print
Issue: Label Job Sent, Data Transfers, But No Print

Issue: Label Job Sent, Data Transfers, But No Print

Condition

A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label.

Cause: Data Parsing Character Miss-match

The prefix and delimiter characters set in the printer do not match the ones in the label format.

Remedy: Set Data Parsing Characters.

  • Verify the ZPL programmings prefix (
    COMMAND CHAR
    ) and delimiter (
    DELIM./CHAR
    ) characters. See Configuration Setting to Command Cross-reference.

Cause: Incorrect Data

Incorrect data is being sent to the printer.

Remedy: Correct Label Format Programming

Internal Printer Support
  • Check the communication settings on the computer. Ensure that they match the printer settings.
  • Check the label format syntax.
    See the ZPL Programmers at zebra.com/manuals. for more information on printer and label programming.