1. ZD611R Thermal Transfer RFID Printer
  2. ZD611R Thermal Transfer RFID Printer
  3. Installing Hardware Options
  4. Media Roll Core Size Adapters
  • ZD611R RFID Link-OS™ Desktop Printer
Media Roll Core Size Adapters
View content for :
Product:

Media Roll Core Size Adapters

This option kit modifies the printer to use media rolls with larger inner roll core diameters.
The media roll adapters option kit includes the screws to attach them. The kits are for the following inner diameter media cores:
  • 38.1 mm (1.5 in.)
  • 50.8 mm (2.0 in.)
    – will not support a full 127 mm (5 in.) outer diameter roll
  • 76.2 (3.0 in.)
    – will not support a full 127 mm (5 in.) outer diameter roll
Adapter Usage
  • The adapters are intended to be permanently installed in the printer.
  • Adapters may be changed to support other media roll sizes.
  • The adapters may loosen if they are changed too many times.
  • Remove any debris from the media roll bay before placing a new media roll.
  1. Installing Media Roll Adapters
  2. Each roll holder gets one adapter.
    Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders. Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.
  3. Place the adapter onto the roll holder.
    The adapter is shaped to fit over the top edge of the roll holder for some inner diameter adapter sizes.
    Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders. Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.
  4. Attach the adapter to the roll holder using a screw.
  5. Tighten the screw until there is no gap between the adapter and the roll holder. Do not tighten beyond this point. Over tightening will strip the thread.
  6. Repeat for the other adapter and roll holder.
Example of a label roll (1) placed on the adapters.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders. Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.Shows adding media adapters and attaching them to roll holders.
Example of Label Roll with 76.2 mm (3.0 inch) Inner Core mounted on Media Core Adapters.
Example of Label Roll with 38.1 mm (1.5 inches) Inner Core mounted on Media Core Adapters.