ZT610 | ZT620 | |||
|---|---|---|---|---|
Label length MINIMUM (200 and 300 dpi) | Non-RFID | |||
Tear-off | 18 mm (0.7 in.) | 18 mm (0.7 in.) | ||
Peel-off | 13 mm (0.5 in.) | 13 mm (0.5 in.) | ||
Rewind | 6 mm (0.25 in.) | 6 mm (0.25 in.) | ||
Cutter | 38 mm (1.5 in.) | 38 mm (1.5 in.) | ||
RFID | Varies for each transponder type | |||
Label length MINIMUM (600 dpi) | Non-RFID | |||
Tear-off | 3 mm (0.125 in.) | N/A | ||
Peel-off | 13 mm (0.5 in.) | |||
Rewind | 3 mm (0.125 in.) | |||
Cutter | 38 mm (1.5 in.) | |||
RFID | Varies for each transponder type | |||
Label length MAXIMUM | Non-continuous media | 991 mm (39 in.) | 991 mm (39 in.) | |
Using cutter catch tray | 216 mm (8.5 in.) | 216 mm (8.5 in.) | ||
MAXIMUM print length (continuous media) | 200 dpi | 3810 mm (150 in.) | 3810 mm (150 in.) | |
300 dpi | 2540 mm (100 in.) | 2032 mm (80 in.) | ||
600 dpi | 762 mm (30 in.) | N/A | ||
MINIMUM label width | Non-RFID | 20 mm (0.79 in.) | 51 mm (2 in.) | |
RFID | Varies for each transponder type | |||
MAXIMUM label width (label and liner) | 114 mm (4.5 in.) | 180 mm (7.1 in.) | ||
Total thickness (includes liner, if any) | MINIMUM | 0.076 mm (0.003 in.) | ||
MAXIMUM | Cutter | 0.23 mm (0.009 in.) | 0.18 mm (0.007 in.) | |
Other | 0.30 mm (0.012 in.) | 0.30 mm (0.012 in.) | ||
Maximum roll outside diameter | 203 mm (8 in.) — on a 76-mm (3-in.) inside diameter core | |||
Inter-label gap | MINIMUM | 2 mm (0.079 in.) | ||
PREFERRED | 3 mm (0.118 in.) | |||
MAXIMUM | 4 mm (0.157 in.) | |||
Ticket/tag notch size (width x length) | 6 mm x 3 mm (0.25 in. x 0.12 in.) | |||
Sensing hole diameter | 3 mm (0.125 in.) | |||
Black mark density, in Optical Density Units (ODU) (black mark) | > 1.0 ODU | |||
MAXIMUM black mark media density | 0.5 ODU | |||
Black mark length (parallel to inside media edge) | 3 mm to 11 mm (0.12 in. to 0.43 in.) | |||
Black mark width (perpendicular to inside media edge) | > 11 mm (> 0.43 in.) | |||
Black mark location | Within 1 mm (0.040 in.) of inside media edge | |||
