1. ZT610/ZT620 Industrial Printer with Color Touch Display User Guide
  2. ZT610 600 dpi Micro Label Printer
  3. Preparing the Printer for Precision Printing
  4. Installing the Rewind Plate
  • ZT610/ZT620 Industrial Printer with Color Touch Display User Guide
Installing the Rewind Plate

Installing the Rewind Plate

Use this procedure to install the rewind plate for Rewind mode.
  1. If the peel plate is installed, remove it from the printer.
    1. Loosen the mounting screw.
      Loosen the mounting screw
    2. Remove the peel plate.
      Remove the peel plate
    3. Tighten the mounting screw.
  2. Insert the hooks on the bottom end of the rewind plate into the slots on the lower print mechanism.
    Insert the bottom hooks of the rewind plate
  3. Rotate the rewind plate up until it engages with the print mechanism.
    Rotate the rewind plate up
  4. Slide the rewind plate to the left to lock it into place.
    Slide the rewind plate left