ZT610 600 dpi Micro Label Specifications

ZT610 600 dpi Micro Label Specifications

This section lists specifications that are unique to the ZT610 600 dpi Micro Label printer.

Label Design

For proper media detection, labels must be present at a distance of 8.63 mm from the media's edge. This corresponds to the location of the front media gap sensor (1) as the media passes under it. If there are no labels at this distance, the sensor will not be able to detect the labels on this specific media.
Front media gap sensor requirements
If necessary, touch
Menu
Sensors
Front Sensor
and disable the front sensor.
Front sensor enabled

Specifications

Media and Ribbon Specifications for the ZT610 600 dpi Micro Label Printer*
Media width (label and liner)
12 mm (0.47 in.) to 114 mm (4.5 in.)
For smaller widths, contact your Zebra sales representative.
Minimum label length
  • Tear and Rewind modes: 3 mm (0.12 in.)
  • Peel mode: 6 mm (0.24 in.)
Ribbon width
20 mm (0.79 in.) to 110 mm (4.33 in.)
* For all other ZT610 specifications, go to Specifications.