Configuration Creation

RFD4031 UHF RFID Premium/Premium+

The 123RFID Desktop application allows users to create, save, and deploy configurations.

To create a new configuration file:

Launch the 123RFID Desktop application and open the

Configuration

tab.

Select

Offline

configuration.

Select the reader for the new configuration to be deployed on

Add

Configuration Name & Notes

for the new configuration file & Giga-DAT File.

Select the proper region information for the regulatory section.

For RFD40 Premium+ and RFD90 devices only, configure the scanning parameters from the

Symbology

and

System

settings.

Configure the settings on the

General

panel.

Save the configuration file locally on the PC by clicking

Save Configuration

To create a Giga-DAT package, begin by following steps 1-8 from the procedure below.

Select

Offline

configuration for RFD90.

Create a Name and Notes for the Giga-Dat file.

Choose the appropriate regulatory settings for the country of operation for device configuration.

Configure settings for the RD90, including Scanner Symbologies, RFID power levels, and RFID singulation.

Select

Load and Print

Select

Create Giga DAT

package.

Observe the

Staged Configuration

dialog box and select the firmware file.

Navigate to the appropriate configuration file and click

Open

. The firmware file name displays in the

Staged Configuration

window.

Click

Save

to save the Giga DAT file.

The

Stage Configuration

window updates to indicate that the new Giga-DAT File is successfully saved.

To load a Giga-DAT package:

Connect to a RFD90 sled.

Click the

Configure

tab.

Select

Load a Saved Config File to Reader

Select the appropriate Giga-Dat file to load onto the device.

Select the RFD90 from

Available readers

Select

Load Configuration to readers