1. RFD4031 UHF RFID Premium/Premium+ Sled Product Reference Guide
  2. Getting Started with the RFD4031
  3. Performing a Factory Default Reset on the Sled
  • RFD4031 UHF RFID Premium/Premium+ 
Performing a Factory Default Reset on the Sled

Performing a Factory Default Reset on the Sled

The below function can be performed using a USB cable, cable cup or USB single slot cradles with a PC:
  1. Disconnect and remove the battery and power sources from the sled.
  2. Connect the sled to a power source using a USB cable, cable cup, or cradle. Observe the flashing battery LED.
  3. Press and hold the upper trigger and immediately insert the battery into the device.
  4. Listen for the confirmation beep indicating that the factory default reset is about to begin and release the trigger.
The sled reboots with a factory reset default configuration.