1. RFD4031 UHF RFID Premium/Premium+ Sled Product Reference Guide
  2. Getting Started with the RFD4031
  3. UI Indicators
  4. Beeper Indications
  • RFD4031 UHF RFID Premium/Premium+ 
Beeper Indications

Beeper Indications

The sled provides user feedback in the form of beeper tones for decode, battery, Bluetooth, and Wi-Fi states. 

Decode Beeper Indications

The following table outlines the context in which beeper feedback is provided and the indication that is presented for a specific decode event
Decode Beeper Indications
Condition
Tone
Good Barcode Decode
Short high beep
Decode Transmission Error
Four long low beeps
Good RFID Decode
Short medium tone
RFID Error
Four long low beeps
Error Message (Other)
No beep
Sled Memory Full (Batch Mode)
Long tones for 5 seconds

Battery Beeper Indications

The following table outlines the context in which decode LED feedback is provided and the indication that is presented for a given device state.
Battery Beeper Indications
Condition
Tone
Battery Level Over 50%
No beep
Battery Level Over 20%
No beep
Battery Level Under 10%
No beep
Battery Level Under 5% (entering Low Power Mode)
One beep
Suspend/Low Power Mode
Low/medium/high beeps
Fully Charged
One beep
Charging Error
Three beeps

Bluetooth Beeper Indications

The following table outlines the context in which beeper feedback is provided and the indication that is presented for a specific Bluetooth state.
Bluetooth Beeper Indications
Condition
Tone
Off
No beep
On/Not Connected
No beep
Discoverable
No beep
Reconnect/Pairing in Process
No beep
Paired/Connected
Short Low/High beep

Wi-Fi Beeper Indications

The following table outlines the context in which beeper feedback is provided and the indication that is presented for specific Wi-Fi states.
Wi-Fi Beeper Indications
Condition
Tone
On/Not Connected
No beep
On/Pairing in Process
No beep
On/Connected
Short/Low/High beep
Out of Range
Short/High/Low beep
Pairing Error
No beep
Off
No beep