This parameter defines the maximum amount of time the scanner attempts to decode a 2D GS1 Digital Link barcode.
To set the GS1 Digital Link Prioritization Timeout, scan the barcode below. Then, scan four numeric barcodes from the Numeric Barcodes corresponding to the desired prioritization time. Enter leading zeroes for times of less than 4 values. For example, to enter 250 msec, scan
0 2 5 0
. To correct an error or change the selection, scan Cancel.
When the Digital Link Mode is set to Mode 2, this is the amount of time the scanner looks for the 2D GS1 Digital Link barcode. If the timer expires before finding the 2D GS1 barcode, the 1D barcode is sent.
When the Digital Link Mode is set to Mode 3, if the 1D barcode is decoded first, this is the amount of time the scanner continues to look for the 2D barcode.
