Power Failure Recovery Mode Jumper (OFF by Default)

ZD410 Desktop Printer User Guide
About
- Notational Conventions
- Icon Conventions
Introduction
Install Hardware Options
Setup
Setup for Windows PC or Other Device Communications
Print Operations
USB Host Port and Link-OS Usage
Maintenance
Troubleshooting
Tools
Interface Connector Wiring
- Universal Serial Bus (USB) Interface
- Serial Port Interface
Dimensions
Media
- Types of Thermal Media
  - Performing a Media Scratch Test
- General Media and Print Specifications
ZPL Configuration

All printer connectivity modules have a power failure recovery jumper which is set to the OFF position by default.

You can set the jumper to On to make the printer automatically power ON when it is plugged into an active AC power source. To activate the mode, see Setting the Power Failure Recovery Mode Jumper.

Power Failure Recovery Mode is available ONLY on printers that have a printer connectivity module installed.

For detailed information on power ON and power OFF modes and behaviors, see Operator Controls:

POWER

Button: Power Failure Recovery Mode.