Powering the Device with Power over Ethernet (PoE)

This section explains how to power the device using Power over Ethernet.

This applies only to the ZEC500-P.

The PoE accessory must be compliant with 802.3at/bt standards and classified as Class 4 or higher Power Sourcing Equipment (PSE).

Ensure your network provides enough energy to power the device. Refer to the PoE-capable network switch or Power Injector Configuration Guide and the

for more information.

Connect the Ethernet cable to the PoE accessory (1), and connect the Ethernet cable to the device's Ethernet port (2).

Avoid excessive disconnecting/reconnecting the RJ45 on a PoE system to minimize electrical arcing on the RJ45 connector.