1. Accessories
  2. 5-Slot Cradle Rack Installation
  3. Installing the 5-Slot Cradle on a Rack
  • TC21/TC26/TC21-HC/TC26-HC Touch Computer
Installing the 5-Slot Cradle on a Rack

Installing the 5-Slot Cradle on a Rack

Ensure tie wrap buckle is on side of power supply. Tie wrap buckle on top of power supply interferes with top tray.
  1. Place the power supply in bottom tray.
  2. Connect AC line cord to power supply.
  3. Connect DC line cord to power supply.
  4. Secure power supply and cables to bottom tray with tie wraps.
  5. Route cables through cable slots.
    1
    DC line cord
    2
    Power supply
    3
    AC line cord
  6. Secure four M2.5 studs to top tray as shown.
    1
    Studs (4)
  7. Align and install 5-Slot cradle onto studs of top tray.
  8. Secure cradle to top tray with two M2.5 safety screws.
    1
    Safety Screws(2)
  9. Slide top tray onto bottom tray.
  10. Connect cables to cradle.
  11. Secure top tray to bottom tray with four M5 screws (two on each side).
See Installing the Rack Mount for installing the bracket assembly onto a rack.