LED | Indication |
|---|---|
Standard Use | |
Green (stays on) | Power Up. |
Radio Indications | |
Green (off, then on) | Bluetooth connection established. |
Blue | Page button pressed. |
Blue (fast/fast/slow) | Paging in progress. |
Charging Indications | |
Amber (stays on) | Pre-charging. |
Amber blinking | Charging. |
Green (stays on) | Fully charged. |
Amber fast blinking | Charging error. See Troubleshooting for more information. |
Red blinking | The battery is charging, but it is at end of life. Replace it with a new battery. |
Virtual Tether Alarm | |
Fast blinking alternating green and red | The scanner disconnects over Bluetooth from the cradle (Virtual Tether Alarm enabled). |
Maintenance Indications | |
Red blinking | Firmware installation in progress. |
LED | Indication |
|---|---|
123Scan | |
Green (slow blinking) | Scanner connected to 123Scan. |
Red (fast blinking) | File being transferred to the scanner (parameters and firmware). |
Red (slow blinking) | Firmware activated on the scanner, loaded into memory. |
Green | Programming complete (parameters and firmware). |
Red | Error state. |
Scanner Management Service (SMS) | |
Red blinking (both scanner and cradle) | Loading the SMS package to scanner. |
