1. DS4678 Product Reference Guide
  2. Radio Communications
  3. Virtual Tether
  4. Configure the Alarm on the Scanner
  • DS4678 Product Reference Guide
Configure the Alarm on the Scanner
View content for :
Platform:

Configure the Alarm on the Scanner

Parameter #
2053
 (SSI # F8h 08h 05h)
This parameter enables the Virtual Tether alarm on the scanner.
Depending on the device, a Virtual Tether alarm can include audio, LED, illumination, and haptic. Each alarm type can be chosen, allowing for creation of custom alarms. If the scanner is in Night Mode the Audio beeper does not sound. The scanner vibrates when the alarm activates.
Choose the following:
  • Enabled - A Virtual Tether alarm can be set on the scanner.
  • Disabled - A Virtual Tether alarm cannot be set on the scanner.
*Disable Virtual Tether Alarm on the Scanner (0)
Enable Virtual Tether Alarm on the Scanner (1)