This parameter sets the amount of time for the Virtual Tether Alarm to play in minutes (1-99 minutes).
To set a time duration, choose Alarm Duration, and then enter the two numeric barcodes from Numeric Barcodes that correspond to the desired alarm duration. Enter a leading zero for single digit numbers. The value zero sets the duration to infinite.
The default value is 5 minutes.
For example, to set a 5 second page timeout, enter 0 barcode and then 5. To correct an error or change the selection, Cancel.
The alarm stops once the connection is established, the timeout period expires, or the scanner's battery is drained.
Any connection stops the alarm. The scanner does not need to connect to the same cradle.
