Field-Installable Printer Accessories and Options
Field-Installable Printer Accessories and Options

Field-Installable Printer Accessories and Options

This section lists the accessories and options available for the printer models covered in this guide.

Printer Connectivity Modules

The connectivity module’s access door must be removed prior to installing the following options. SeeAccessing the Connectivity Module Slot.
  • ZD420 Serial Port — Installing the Serial Port Module
    • RS-232 DB-9 connector with DTE/DTC auto-switching — Serial Port Interface
  • ZD420 Internal Ethernet (wired LAN) — Installing the Internal Ethernet (LAN) Module
    • RJ-45 connector
    • Fast Ethernet 10/100 auto-switching, 10Base-T, and 100Base-TX networks

Media Handling Options

The printer’s standard bezel must be removed prior to installing the following options — Removing the Standard Bezel.
  • Label Dispenser (automatically peels liner off labels and dispenses the labels) — Installing the Label Dispenser
  • General Purpose Media Cutter — Installing the Standard Media Cutter
  • Linerless Media Cutter — Installing the Linerless Media Cutter
  • Linerless Media ‘Tear-Off’ Label Bezel — Installing the Linerless Media Tear-Off Bezel
  • Printer Resolution Upgrade Kits (203 dpi and 300 dpi) — Print Resolution Upgrade Kits
  • Media Roll Adapters for 38.1 mm (1.5 in.), 50.8 mm (2.0 in.), or 76.2 mm (3.0 in.) I.D. media cores — Media Roll Core Size Adapters

Power Base Options

The ZD Series (ZD620 and ZD420) printers are supported with power base field upgrade kits for each the direct thermal and thermal transfer versions of these printers.
  • Attached Power Supply Base (power supply included) — Installing the Attached Power Supply Base Options
  • Battery Power Base (battery pack sold separately) — Installing the Attached Battery Base Options
  • Battery Pack (battery power base sold separately) — Installing the Battery into the Attached Power Base