TC101 Touch Computer

Replacing the Battery

This section describes how to replace the TC101 battery.

User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be affected. DO NOT put any labels, asset tags, engravings, stickers, etc. in the battery well.

Do not add or remove the microSD card during battery replacement.

Power off the device.

If the hand strap is attached, remove the hand strap.

Push both battery latches inward.

Do not attempt to insert fingers under the latches when pulling on the battery. Damage to the latches may occur.

While pressing the latches down, press the two latches in toward the center of the device. The latches must be pressed in completely to release the battery.

While gripping the battery latches, lift the depleted battery out of the device.

Insert the new battery, bottom first, into the battery compartment in the back of the device.

Press the new battery down into the device until the release latches click into place.

Replace the hand strap if required.