TC101 Touch Computer

Main Battery Charging

Before using the device for the first time, charge the main battery until the green Charging/Notification light-emitting diode (LED) remains lit. Use a cable or a cradle with the appropriate power supply to charge the device.

The following batteries are available:

Standard 3,800 mAh PowerPrecision LI-ON Battery - part number: BTRY-TC2L-2XMAXX-01

Extended 5,200 mAh PowerPrecision LI-ON Battery - part number: BTRY-TC2L-3XMAXX-01

The device’s Charging/Notification LED indicates the battery charging status in the device. The standard battery charges from fully depleted to 90% in under three hours. Charging details are as follows:

Standard Battery:

Reaches 90% charge in approximately 3 hours.

Extended Battery:

Reaches 90% charge in approximately 4 hours.

Charge batteries at room temperature with the device in Sleep mode.

Charging/Notification LED Charging Indicators
State	Indication
Off	Device is not charging. Device is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered.
Slow Blinking Amber (1 blink every four seconds)	Device is charging.
Slow Blinking Red (1 blink every four seconds)	Device is charging, but the battery is at the end of its useful life.
Solid Green	Charging complete.
Solid Red	Device is either charging or fully charged, but the battery is at end of useful life.
Fast Blinking Amber (two blinks/second)	Charging error, for example: Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours).
Fast Blinking Red (two blinks/second)	Charging error but the battery is at the end of its useful life, for example: Temperature is too low or too high. Charging has gone on too long without completion (typically eight hours).