This section reviews the configuration settings for Bluetooth in the reader administrator console.
Configure Network Settings - Bluetooth Tab
The reader supports only automatic IP configuration of the Bluetooth interface.
Because these are automatically configured for a reader, they cannot be changed manually.
Current IPV4 Address - Displays the IPV4 Address of the reader and is set automatically.
IPV4 Subnet Mask - Displays the IPV4 Subnet mask address of the reader and is set automatically.
MAC Address - Displays the MAC Address of the reader hardware and is set automatically.
Discoverable - Select whether other Bluetooth-enabled devices see the reader on discovery.
• Pairable - Select whether any Bluetooth-enabled device can pair with reader.
Use Passkey - Enable this option to mandate the connecting device to supply a pre-determined passkey to use for authentication while pairing.
• Passkey - The passkey to use for authentication.
DHCP start address - The starting address of the DHCP IP range out of which an IP is assigned to the connecting device.
DHCP end address - The end address of the DHCP IP range out of which an IP is assigned to the connecting device.
The DHCP IP range specified using the DHCP start address and DHCP end address options determines the client's IP connecting to the reader. The first two octets of the IP address of the reader Bluetooth interface are fixed to 192.168, and the last two octets are the decimal equivalent to the last two octets of the reader's ethernet MAC address.
