1. FXR90 RFID Reader Integration Guide
  2. Installation and Communication
  3. Communication and Power Connection
  4. Ethernet Connection
  5. Ethernet: Power via External Power Supply
  • FXR90 Integration Guide
Ethernet: Power via External Power Supply
View content for :
Platform:

Ethernet: Power via External Power Supply

The FXR90 RFID reader communicates to the host through a 10/100/1000 Base-T Ethernet cable and receives power through a Zebra power supply.
  1. Select the 1 m, 3 m, 5 m, or 15 m Ethernet cable. 
  2. Connect the Ethernet cable to the FRX90 Ethernet M12 connector.
  3. Connect the other end of the Ethernet cable to the host system LAN port.
  4. Assemble the power supply cable connector to the reader.
  5. Route the power cable.
  6. Connect the FXR90 Zebra AC power supply to a wall outlet.
  7. Verify that the unit booted properly and is operational.
  8. On a networked computer, open an internet browser and connect to the reader.
  9. Log into the Administrator Console.