Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
FXR90 RFID Reader Integration Guide
Administrator Console
Configure Network Settings - Ethernet Tab
802.1x Configuration
802.1x - TLS Authentication
FXR90 Integration Guide
FXR90 Integration Guide
About This Guide
Icon Conventions
Service Information
Getting Started
Features
FXR90 Parts
FXR90 LEDs
Bootup LED Sequence
Installation and Communication
Unpacking the Reader
Flush Mounting the Reader
Mounting Tips
VESA Mount
WAN Antenna Mounting Considerations
WAN Antenna Bracket
Connecting Reader Antennas
Communication and Power Connection
Ethernet Connection
Ethernet: Power via External Power Supply
Ethernet: Power via PoE or PoE+
Power Source
USB Connection
GPIO Interface Connection
GPIO Breakout Block Mounting Specifications
GPIO Wiring
GPIO Breakout Block LED Behavior
Installing the SIM Card
Power Supply Options
Connecting the AC-DC Outdoor Input
Connecting the AC-DC Outdoor Output
Connecting the DC-DC Input
Connecting the DC-DC Output
Connecting the AC-DC Indoor Power Supply
Power Supply Mounting Pattern
Cable Length Versus Voltage Drop
Administrator Console
Reader Administrator Console
Auto Discovery
Connecting to the Reader
Connecting to the Reader via Command Prompt
Connecting via the Host Name
Connecting via IP Address
Using Link Local Networking when DHCP Server is Not Available
Using Zero-Configuration Networking when DHCP Server is Not Available
Administrator Console Login
First Time / Start-up Login
Logging In with Default User ID and Password
Accessing GPS
Admin Drop-down Menu
Accessing IOT-Connect API Docs
Resetting the Reader - Simple Reboot
Resetting the Reader- Factory Reset
Change Password
Change Password - rfidadm
Setting the Region
Administrator Console Option Selections
Antenna Status
Antenna Configuration
Network Settings
Configure Network Settings - Ethernet Tab
Ethernet IPv4
Ethernet IPv6
802.1x Configuration
802.1x - TLS Authentication
802.1x - TTLS/TLS Authentication
802.1x - PEAP/MSCHAPV2
802.1x - TTLS/MSCHAPV2
802.1x - PEAP/TLS
Wi-Fi Configurations
Connecting to the WPA2 Personal
Connecting to Hidden WiFi Network
WPA2 Enterprise Configurations
TLS
TTLS/TLS
PEAP/MSCHAPV2
PEAP/TLS
WPA3 Personal
Configure Network Settings - Bluetooth Tab
Bluetooth Connection
Connecting via an Android Device
Connect via Windows Device
Connecting via an iOS Device
Configure Network Settings - WAN Tab
Connecting eSIM
Disconnecting from eSIM
Deleting an eSIM Profile
GPIO
Applications
Firmware Update
Firmware Update - USB Drive
Updating the Firmware - Server Based
Updating the Firmware - File Based
Reverting the Firmware Update
Reader Certificates
System Log
Troubleshooting
Technical Specifications
802.1x - TLS Authentication
802.1x - TLS Authentication
This section shows settings for outer authentication as TLS; there is no inner authentication option. A client-type installed certificate is required.
802.1x Configuration - TLS
802.1x Configuration
