LED | Indication |
|---|---|
Standard Use | |
Green (stays on) | Power Up |
Radio Indications | |
Green (off, then on) | Bluetooth connection established |
Blue | Page button |
Blue (fast/fast/slow) | Page issued |
Charging Indications | |
Amber (stays on) | Pre-charging |
Amber blinking | Charging |
Green (stays on) | Fully charged |
Amber fast blinking | Charging error. See Troubleshooting for more information. |
Red blinking | The battery is charging, but it is at end of life. Replace it with a new battery. |
Red fast blinking | The cradle is either not providing current to the scanner, or the scanner is consuming more current than the cradle can supply (see Troubleshooting for more information) |
Virtual Tether Alarm | |
Fast blinking alternating green and red | The scanner disconnects over Bluetooth from the cradle (Virtual Tether Alarm enabled) |
Maintenance Indications | |
Red (stays on) | Enable boot loader |
Red blinking | Firmware installation |
LED | Indication |
|---|---|
123Scan | |
Green (slow blinking) | Scanner connected to 123Scan |
Red (fast blinking) | File being transferred to the scanner (parameters and firmware) |
Red (slow blinking) | Firmware activated on the scanner, loaded into memory |
Green | Programming complete (parameters and firmware) |
Red | Error state |
SMS | |
Red blinking (both scanner and cradle) | Loading the SMS package to scanner |
