1. DS8208/DS8288 Product Reference Guide
  2. Radio Communications
  3. Page Parameters
  4. Page Button
  • DS82 Series Product Reference Guide
Page Button
View content for :
Product:
Platform:

Page Button

Parameter #
746
 (SSI # F1h EAh)
This parameter enables a cradle with a page button to cause paired scanners to emit a beep sequence when the page button is touched.
Choose the following:
  • Enabled - Touching the page button causes a paired scanner to beep.
  • Disabled - Touching the page button does not cause a paired scanner to beep.
To use the page button, press the button barcode for approximately one second. The cradle LED turns blue when the scanner is out of the cradle. The paired scanner beeps five times. If multiple scanners are paired to the cradle, all scanners beep five times.
Scanners out of radio range do not beep when paged. For radio range information, refer to Technical Specifications.
In the rare case where a scanner is paired to a mobile computer host device but is charging in a cradle, pressing the page button will only cause the light to blink, but the scanner does not beep.
barcode
*Enable Page Button (1)
barcode
Disable Page Button (0)