Pairing registers a scanner to the cradle so that the scanner and cradle can exchange information.
The
CR8288
and
CR8288-PC
operate in two modes: Point-to-Point and Multipoint-to-Point. In Point-to-Point mode, pair the digital scanner to the cradle either by inserting it in the cradle (if pair on contacts is enabled) or by scanning the pairing barcode.
In Multipoint-to-Point mode, you can pair up to seven scanners to one cradle.
To use this feature, scan the multipoint barcode in Modes of Operation when the digital scanner is connected to the cradle.
To pair the scanner with the cradle, insert the scanner in the cradle or scan the pairing barcode. (Pairing on insertion into the cradle is enabled by default.)
The pairing barcode that connects the digital scanner to a cradle is unique to each cradle. Do not scan data or parameters until pairing completes.
