You can use the hardware options to mount the cradle or stick the 3M Dual Lock Fasteners on the cradle and surface. Refer to the fastener documentation for more information.
Position the cradle on the mounting surface and mark the top and bottom edges.
Measure in 28.5 mm (1.1 in.) from the top and 50.5 mm (2.0 in.) from the bottom.
Pre-drill holes to accommodate two threaded screws. Drill the holes 45.5 mm (1.8 in.) apart.
Attach all required interface and power cables.
Press the cables into the cable grooves.
Secure the screws through the mounting surface.
Use a screwdriver to secure the M4 screws to the cradle. The screws can penetrate a maximum of 5 mm (0.2 in.) into the cradle.
The cradle is mounted, and you can insert the scanner.
