• Zebra Aurora Focus
Listening to RS-232 Output Events
Listening to RS-232 Output Events

Listening to RS-232 Output Events

  1. Open an RS-232 client terminal software such as PuTTy.
  2. Establish a connection to the device by clicking
    Session
    .
  3. Set
    Serial Line
     to the COM Port Number.
  4. Set
    Speed
     to the Serial speed defined in Aurora Focus.
  5. Click
    Open
     to open a serial connection in terminal.
  6. If the connection is successful, observe the terminal window with a green cursor.
  7. Trigger the job and observe the results in the terminal window to confirm that the device is configured as expected.