Setting | Description |
|---|---|
Beeper | |
Beeper Enable | Enables the beeper on the device. |
Beeper Volume | Configures the volume of the beeper.
|
Beeper Tone | Configures the tone of the beeper.
|
Beep on Job Success | When enabled, the device beeps upon successful completion of a job. |
Beeper Duration | Configures the tone of the beeper.
|
Suppress Power-Up Beeps | When enabled, the power-up warble beeps that sound upon device start-up play at a reduced level. |
Power | |
Unrestricted USB-A Power | When enabled, the device receives unrestricted power from a USB-A power source. This is required to enable full-power internal lighting |
Hardware Buttons | |
Tune Button Enable | Turn on or off the Tune button on the smart camera. |
Trigger Button Enable | Turn on or off the Trigger button on the smart camera. |
Configuration Barcodes | |
Enable Parameter Barcodes | When enabled, the device configuration can be changed using a barcode |
Timeout | Configure the maximum time in ms to attempt to generate the barcode before a timeout occurs. |
360 LED | |
Number of Flashes | Use the slider to configure the number of flashes the LED illuminates upon decode. |
Time per Flash | Use the slider to configure the number of times in ms the LED illuminates upon decode. |
Configure Logging | |
Logging Options | Select Basic or All to enable logging to generate log files that provide additional information on job runs. Download the log files from the device using the web HMI. |
