Setting | Description |
|---|---|
Direction | Configure the input signals coming into the device, or the output signals sent out. Select the GPIO port configuration: Input, Output, Static High, and Static Low. Static High sources the current for an external load. Static Low sinks the current for an external load. |
Signal Type | Configure the Signal Type, such as a manual or hardware trigger. Use the Input signal to connect to a hardware or software trigger. Use the Output to connect to Job Result, or use it as an External Light Strobe. |
Advanced Settings | Use Input to configure Input Debounce and Input Delay. Use Output to configure Pulse Width and Output Delay. |
External Illumination Mode | Toggle this setting to automatically configure the pins in this port to power and control external illumination. |
