• Zebra Aurora Focus
Sending a Serial Trigger to the Device
Sending a Serial Trigger to the Device

Sending a Serial Trigger to the Device

  1. Open a Serial client terminal software such as PuTTy.
  2. Establish a connection to the device by clicking
    Serial
     tab.
  3. Enter the
    COM port
     settings:
    • Name: COM port number as defined in Device Manager.
    • Speed, Baud, and Parity as defined in Device Settings using Zebra Aurora Focus.
    • Stop Bits: 1
    • Handshake/Mode: Off
  4. Click
    Open
     to establish a serial connection.
  5. If a connection is successfully established, observe the
    Serial Port COM opened
     message.
  6. Type the
    Trigger String
     as defined in
    Settings
     in Zebra Aurora Focus and click
    Enter.
  7. Enter
    TRIGGER
     as the default
    Trigger String
     and click
    Send
     to send a trigger using serial.