• WT6300 Wearable Computer Product Reference Guide for Android™
Installing the 4-Slot Battery Chargers Rack
Installing the 4-Slot Battery Chargers Rack

Installing the 4-Slot Battery Chargers Rack

  1. Place one power supply horizontally in bottom tray.
  2. Place one power supply vertically in bottom tray.
  3. Connect AC line cords to power supplies.
  4. Connect DC line cords to power supplies.
  5. Secure power supplies and cables to bottom tray with tie wraps.
  6. Route cables through cable slots.
    route cables
    1
    DC Y cable 1
    2
    DC Y cable 2
    3
    Power supply 1
    4
    Power supply 2
    5
    AC line cord 2
    6
    AC line cord 1
  7. Slide top tray onto bottom tray until top tray touches vertical power supply.
    slide top tray onto bottom tray
  8. Install 16 M2.5 studs onto top tray as shown below.
    install stubs
    1
    Studs (16)
  9. Align and install 4-Slot Battery Charger onto four studs.
  10. Connect DC Y cables to four 4-Slot Battery Chargers.
  11. Secure top tray to bottom tray with four M5 screws (two on each side).