Wall Mounting the Bracket 5 Slot Cradle

Drill holes and install anchors according to the template supplied with the bracket.

Install two screws for bottom of bracket. The screw heads should protrude 2.5 mm (0.01 in.) from the wall.

Align the mounting bracket’s bottom mounting key holes with the screws.

Hang the bracket on the screws.

Install two top screws.

Tighten all screws.

Assembly the top tray. See steps 6 through 8 on page 129.

Slide the assembled top tray onto bottom tray.

Connect cables to cradle.

Secure top tray to bottom tray with four M5 screws (two on each side).

Route cables and connect to power source.

Installer should ensure that all building codes are followed when connecting the power supplies to an AC power source.

While installing the brackets, power supplies and cables:

Use tie wraps to secure cables to the bracket.

Coil cables wherever possible.

Route power cables along wall and secure.