• WT6300 Wearable Computer Product Reference Guide for Android™
Performing a Factory Reset Using ADB
Performing a Factory Reset Using ADB

Performing a Factory Reset Using ADB

Perform a Factory Reset using ADB.
  1. Connect the device to a host computer using a USB cable.
  2. Go to
    Settings
    .
  3. On Android 11, touch
    System
    Advanced
    Developer options
    .
  4. On Android 13, touch
    System
    Developer options
    .
  5. Slide the
    USB debugging
     switch to the
    ON
     position.
  6. Touch
    OK
    .
  7. If the device and host computer are connected for the first time, the
    Allow USB debugging?
     dialog box with the
    Always allow from this computer
     check box displays. Select the check box, if required.
  8. Touch
    OK
     or
    ALLOW
    .
  9. On the host computer, navigate to the
    platform-tools
     folder and open a command prompt window.
  10. Type
    adb devices
    .
    The following displays: 
    List of devices attached
XXXXXXXXXXXXXXX device
    Where XXXXXXXXXXXXXXX is the device number.
    If the device number does not appear, ensure that the ADB drivers are installed properly.
  11. Type:
    adb reboot recovery
  12. Press
    Enter
    .
    The System Recovery screen appears on the device.
  13. On the host computer command prompt window type
    adb sideload <file>
    .
    where: <file> = the path and filename of the zip file.
  14. Press
    Enter
    .
    The Factory Reset package installs, and then the System Recovery screen appears on the device.
  15. Navigate to
    Reboot system now
     and press the Enter key or Power button to reboot the device.
  16. Disconnect the USB cable from the device.