Installing the 5-Slot Cradle Rack
Installing the 5-Slot Cradle Rack

Installing the 5-Slot Cradle Rack

  1. Place the power supply in bottom tray.
  2. Connect AC line cord to power supply.
  3. Connect DC line cord to power supply.
  4. Secure power supply and cables to bottom tray with tie wraps.
    Ensure that the tie wrap buckle is on the side of the power supply. Tie wrap buckle on top of power supply interferes with top tray.
  5. Route cables through cable slots.
  6. Secure four M2.5 studs to top tray as shown.
    1
    Studs (4)
  7. Align and install 5-Slot cradle onto studs of top tray.
  8. Secure cradle to top tray with two M2.5 safety screws.
  9. Slide top tray onto bottom tray.
  10. Connect cables to cradle.
  11. Secure top tray to bottom tray with 4 M5 screws (two on each side).
    See Installing the Rack Mount for installing the bracket assembly onto a rack.