Replacing the Keypad Mount

Power off the device.

Using a T8 Torx screwdriver, remove the two screws that connect the keypad to the mount.

Using a T6 Torx screwdriver, remove the three screws that connect the keypad mount to the device.

Slide the mount off of the device.

Press and hold the latch under the keypad.

Slide the keypad off the mount.

Slide the keypad onto the new mount. Ensure the keypad snaps securely onto the mount.

Slide the mount onto the device.

Using a T8 Torx screwdriver, secure the keypad mount to the device with the two screws, and torque to 2kgf-cm or 1.73lbf-in.

Using a T6 Torx screwdriver, secure the keypad mount to the device with the three screws, and torque to 2kgf-cm or 1.73lbf-in.

Power on the device.